Skip to content

    Thingsform IoT

    From sensor to decision, with nothing in between.

    Your equipment speaks MQTT, HTTP or Modbus. Thingsform reads the telemetry, spots what falls outside the ordinary and sends the command back — with no integrator and no third tool in the middle.

    Start for freeSee the 31 use cases

    31

    ready-made use cases

    7

    perception kinds

    3

    ingestion protocols

    124

    preconfigured metrics

    Connected fleet

    4/5 online
    Passerelle Atelier AGateway · MQTT
    ESP32 · Ligne 2Sensor · MQTT
    Compteur TGBTSensor · Modbus
    Vanne V-12Actuator · MQTT
    Sonde cuve C3Sensor · HTTP

    Power

    29kW

    Temperature

    50°C

    Pressure

    4.0bar

    Vibration

    0.8mm/s

    Perception → command

    Threshold crossed — vibration 3.1 mm/sPerception · threshold
    Drift detected on bearing P2Perception · drift
    Correlated pressure / flow anomalyPerception · anomaly
    Command published — V-12 closedControl · mqtt_publish

    The whole loop, in a single tool

    Most platforms stop at collection. This one closes the loop: what it observes triggers what it sends back.

    01

    Connect

    MQTT, HTTP or Modbus, with a ready template for Raspberry Pi, ESP32 and Arduino.

    02

    Supervise

    Fleet, assets and their operating mode, live and per site.

    03

    Perceive

    Thresholds, drifts, correlations and anomalies, with no hand-written rule.

    04

    Command

    The setpoint goes back to the device — direct, PID or sequenced.

    Seven ways to spot what's off

    A crossed threshold is easy to see. A slow drift, an unusual correlation or unseen behaviour, far less so — and those are the expensive ones.

    Threshold

    A value leaves its acceptable range.

    Drift

    The reading slowly moves away from its baseline.

    Correlation

    Two quantities move together abnormally.

    State change

    A device switches mode.

    Anomaly

    Unseen behaviour, outside any threshold.

    Localisation

    An asset's position leaves its zone.

    Free space

    Clearance available around a machine.

    …then the command goes back

    • mqtt_publish Publish to an MQTT topic
    • modbus_write Write a Modbus register
    • http_post HTTP call to the device
    • manual Human approval before sending

    Your hardware already works

    Every template ships the script, the dependencies and the topic to copy. A Raspberry Pi sends its first readings within minutes, with no custom integration.

    Supervised assets

    VehiclesMachinesZonesLines

    Operating modes

    ProductionStandbyEmergencyMaintenance

    Raspberry Pi

    MQTT PythonHTTP JSONAgent Modbus

    ESP32

    MQTTHTTP

    Arduino

    MQTT Wi-FiHTTP Wi-Fi

    Agent edge

    DockerPasserelle locale

    Circuit designer

    No board yet? Assemble it inside the platform: microcontrollers, sensors, actuators and passives, checked wiring, simulation, then firmware generated and ready to flash.

    31 use cases, delivered configured

    Each one arrives with its dashboard, its metrics and its alarms. Pick yours, connect your sensors: there is nothing to build.

    Smart energy

    Energy monitoring and efficiency

    Power (kW)Energy (kWh)Power factorVoltage (V)

    24 devices · 3 sites

    Environment monitoring

    Indoor & outdoor environment analysis

    Temperature (°C)Humidity (%)CO₂ (ppm)Noise (dB)

    18 devices · 4 sites

    Smart office

    Boost productivity & optimize resources

    Occupancy (%)Active desksHVAC load (%)Lighting (lux)

    32 devices · 2 sites

    Water metering

    Water use analysis & fraud detection

    Flow (L/min)Volume (m³)Pressure (bar)Leak index

    14 devices · 5 sites

    Smart retail

    Food storage & safety monitoring

    Chiller (°C)Freezer (°C)Door open (min)Humidity (%)

    20 devices · 6 sites

    Smart farming

    Remote soil & equipment monitoring

    Soil moisture (%)Soil pHTractor RPMAir temp (°C)

    16 devices · 3 sites

    Site fleet tracking

    Fleet tracking & management

    Speed (km/h)Fuel (%)Engine hours (h)GPS accuracy (m)

    28 devices · 8 sites

    Health care

    Smart assisted living solution

    Heart rate (bpm)Room temp (°C)Motion (/h)Bed presence (%)

    12 devices · 1 sites

    Smart metering

    Meter data collection & analysis

    Consumption (kWh)Demand (kW)Meter health (%)Voltage (V)

    64 devices · 12 sites

    Air quality monitoring

    Monitor AQI using wide range of sensors

    AQIPM2.5 (µg/m³)PM10 (µg/m³)VOC (ppb)

    10 devices · 2 sites

    Smart irrigation

    Soil moisture & irrigation control

    Soil moisture (%)Valve (%)Water flow (L/min)Rain (mm)

    22 devices · 4 sites

    Waste management

    Real-time waste management

    Fill level (%)Weight (kg)Pickup ETA (h)Temp (°C)

    36 devices · 9 sites

    Tank level monitoring

    Fuel tank location & level monitoring

    Level (%)Volume (L)Fluid temp (°C)Leak (L/h)

    8 devices · 3 sites

    SCADA

    Control industrial processes in real time

    Line speed (u/min)Pressure (bar)Motor load (%)Quality (%)

    42 devices · 2 sites

    Swimming pool

    Pool water quality & equipment control

    pHChlorine (ppm)Water temp (°C)Pump (kW)

    6 devices · 1 sites

    Oil & gas drilling

    Control drilling operations

    Depth (m)Bit RPMMud pressure (bar)Vibration (mm/s)

    14 devices · 1 sites

    Energy management

    Monitor & control energy systems

    Grid import (kW)Solar (kW)Battery SOC (%)Daily cost (€)

    26 devices · 4 sites

    Data center

    Server room cooling & PUE monitoring

    Hot aisle (°C)Humidity (%)PUECRAC load (%)

    48 devices · 2 sites

    EV charging

    Electric vehicle charging infrastructure

    Power (kW)Sessions/dVehicle SOC (%)Availability (%)

    16 devices · 4 sites

    Predictive maintenance

    Machine health & anomaly detection

    Vibration (mm/s)Bearing temp (°C)Cycle hours (h)Anomaly score (%)

    30 devices · 3 sites

    Cold chain logistics

    Refrigerated transport monitoring

    Cargo temp (°C)Door open (min)GPS compliance (%)Compressor (%)

    22 devices · 6 sites

    Smart parking

    Parking occupancy & turnover analytics

    Occupancy (%)Avg. stay (min)Entries/hSensor battery (%)

    40 devices · 5 sites

    Smart lighting

    Public & building lighting control

    Ambient lux (lux)Power (kW)Active faultsDimming (%)

    52 devices · 8 sites

    Construction site

    Dust, noise & safety monitoring

    PM10 (µg/m³)Noise (dB)Wind (m/s)Zone presence

    12 devices · 1 sites

    Pipeline monitoring

    Oil & gas pipeline flow & leak detection

    Flow (m³/h)Pressure (bar)Leak indexValve (%)

    18 devices · 4 sites

    Pharma clean room

    GMP clean room compliance

    Particles (/m³)ΔP (Pa)Humidity (%)Temperature (°C)

    14 devices · 1 sites

    Elevator monitoring

    Lift operations & maintenance

    Trips/dDoor cyclesMotor temp (°C)Active faults

    24 devices · 3 sites

    Aquaculture

    Fish farm water quality monitoring

    Dissolved O₂ (mg/L)Water temp (°C)pHFeed level (%)

    10 devices · 2 sites

    Smart greenhouse

    Greenhouse climate & PAR control

    Inside temp (°C)Humidity (%)PAR (lux)CO₂ (ppm)

    20 devices · 3 sites

    Fire & life safety

    Smoke detection & safety systems

    Smoke (%)Battery (%)Active alarmsOffline zones

    56 devices · 2 sites

    Perimeter security

    Site perimeter & intrusion monitoring

    Intrusions/hForced doorsCameras OK (%)Response time (min)

    34 devices · 2 sites

    Connect your first sensor

    The account is free and the templates are included. In the time it took to read this page, a Raspberry Pi would already be reporting.

    Start for freeTalk to an engineer