Thingsform IoT
IoT use case
Smart energy
Energy monitoring and efficiency
Power
37kW
1248 kW
Energy
587kWh
120890 kWh
Power factor
0.91
0.820.98
Voltage
230V
228242 V
24devices
22online
3sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 24 devices · 3 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Power · Energy · Power factor · Voltage
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Power
12–48 kW- Threshold outside the 12–48 kW range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Energy
120–890 kWh- Threshold outside the 120–890 kWh range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Power factor
0.82–0.98- Threshold outside the 0.82–0.98 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Voltage
228–242 V- Threshold outside the 228–242 V range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart energy dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.