Thingsform IoT
IoT use case
Energy management
Monitor & control energy systems
Grid import
85kW
5120 kW
Solar
52kW
085 kW
Battery SOC
59%
1595 %
Daily cost
47€
12340 €
26devices
25online
4sites
1 device offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 26 devices · 4 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Grid import · Solar · Battery SOC · Daily cost
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Grid import
5–120 kW- Threshold outside the 5–120 kW range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Solar
0–85 kW- Threshold outside the 0–85 kW range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Battery SOC
15–95 %- Threshold outside the 15–95 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Daily cost
12–340 €- Threshold outside the 12–340 € range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Energy management dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.