Thingsform IoT
IoT use case
Smart metering
Meter data collection & analysis
Consumption
376kWh
45520 kWh
Demand
12kW
218 kW
Meter health
95%
88100 %
Voltage
222V
220240 V
64devices
61online
12sites
3 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 64 devices · 12 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Consumption · Demand · Meter health · Voltage
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Consumption
45–520 kWh- Threshold outside the 45–520 kWh range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Demand
2–18 kW- Threshold outside the 2–18 kW range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Meter health
88–100 %- Threshold outside the 88–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Voltage
220–240 V- Threshold outside the 220–240 V range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart metering dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.