Thingsform IoT
IoT use case
Aquaculture
Fish farm water quality monitoring
Dissolved O₂
7.5mg/L
4.09.0 mg/L
Water temp
19°C
1224 °C
pH
7.6
6.88.2
Feed level
19%
1095 %
10devices
10online
2sites
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 10 devices · 2 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Dissolved O₂ · Water temp · pH · Feed level
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Dissolved O₂
4.0–9.0 mg/L- Threshold outside the 4.0–9.0 mg/L range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Water temp
12–24 °C- Threshold outside the 12–24 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
pH
6.8–8.2- Threshold outside the 6.8–8.2 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Feed level
10–95 %- Threshold outside the 10–95 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Aquaculture dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.