Thingsform IoT
IoT use case
Health care
Smart assisted living solution
Heart rate
86bpm
5898 bpm
Room temp
22°C
2024 °C
Motion
10/h
018 /h
Bed presence
11%
0100 %
12devices
12online
1sites
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 12 devices · 1 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Heart rate · Room temp · Motion · Bed presence
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Heart rate
58–98 bpm- Threshold outside the 58–98 bpm range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Room temp
20–24 °C- Threshold outside the 20–24 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Motion
0–18 /h- Threshold outside the 0–18 /h range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Bed presence
0–100 %- Threshold outside the 0–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Health care dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.