Thingsform IoT
IoT use case
Fire & life safety
Smoke detection & safety systems
Smoke
59%
085 %
Battery
67%
15100 %
Active alarms
7
012
Offline zones
1
05
56devices
54online
2sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 56 devices · 2 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Smoke · Battery · Active alarms · Offline zones
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Smoke
0–85 %- Threshold outside the 0–85 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Battery
15–100 %- Threshold outside the 15–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Active alarms
0–12- Threshold outside the 0–12 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Offline zones
0–5- Threshold outside the 0–5 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Fire & life safety dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.