Thingsform IoT
IoT use case
Site fleet tracking
Fleet tracking & management
Speed
63km/h
090 km/h
Fuel
64%
8100 %
Engine hours
2 691h
1204 800 h
GPS accuracy
3m
115 m
28devices
26online
8sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 28 devices · 8 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Speed · Fuel · Engine hours · GPS accuracy
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Speed
0–90 km/h- Threshold outside the 0–90 km/h range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Fuel
8–100 %- Threshold outside the 8–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Engine hours
120–4 800 h- Threshold outside the 120–4 800 h range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
GPS accuracy
1–15 m- Threshold outside the 1–15 m range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Site fleet tracking dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.