Thingsform IoT
IoT use case
Cold chain logistics
Refrigerated transport monitoring
Cargo temp
-2°C
-258 °C
Door open
12min
020 min
GPS compliance
93%
85100 %
Compressor
28%
2090 %
22devices
21online
6sites
1 device offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 22 devices · 6 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Cargo temp · Door open · GPS compliance · Compressor
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Cargo temp
-25–8 °C- Threshold outside the -25–8 °C range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Door open
0–20 min- Threshold outside the 0–20 min range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
GPS compliance
85–100 %- Threshold outside the 85–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Compressor
20–90 %- Threshold outside the 20–90 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Cold chain logistics dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.