Thingsform IoT
IoT use case
Pharma clean room
GMP clean room compliance
Particles
2 441/m³
103 500 /m³
ΔP
23Pa
535 Pa
Humidity
48%
4055 %
Temperature
19°C
1923 °C
14devices
14online
1sites
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 14 devices · 1 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Particles · ΔP · Humidity · Temperature
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Particles
10–3 500 /m³- Threshold outside the 10–3 500 /m³ range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
ΔP
5–35 Pa- Threshold outside the 5–35 Pa range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Humidity
40–55 %- Threshold outside the 40–55 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Temperature
19–23 °C- Threshold outside the 19–23 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Pharma clean room dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.