Thingsform IoT
IoT use case
Smart farming
Remote soil & equipment monitoring
Soil moisture
35%
1842 %
Soil pH
6.6
5.87.2
Tractor RPM
1 569
8002 200
Air temp
11°C
832 °C
16devices
14online
3sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 16 devices · 3 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Soil moisture · Soil pH · Tractor RPM · Air temp
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Soil moisture
18–42 %- Threshold outside the 18–42 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Soil pH
5.8–7.2- Threshold outside the 5.8–7.2 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Tractor RPM
800–2 200- Threshold outside the 800–2 200 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Air temp
8–32 °C- Threshold outside the 8–32 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart farming dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.