Thingsform IoT
IoT use case
Waste management
Real-time waste management
Fill level
70%
598 %
Weight
396kg
20640 kg
Pickup ETA
40h
172 h
Temp
17°C
1538 °C
36devices
34online
9sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 36 devices · 9 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Fill level · Weight · Pickup ETA · Temp
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Fill level
5–98 %- Threshold outside the 5–98 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Weight
20–640 kg- Threshold outside the 20–640 kg range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Pickup ETA
1–72 h- Threshold outside the 1–72 h range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Temp
15–38 °C- Threshold outside the 15–38 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Waste management dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.