Thingsform IoT
IoT use case
Smart office
Boost productivity & optimize resources
Occupancy
65%
1288 %
Active desks
42
864
HVAC load
50%
2075 %
Lighting
249lux
200650 lux
32devices
30online
2sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 32 devices · 2 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Occupancy · Active desks · HVAC load · Lighting
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Occupancy
12–88 %- Threshold outside the 12–88 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Active desks
8–64- Threshold outside the 8–64 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
HVAC load
20–75 %- Threshold outside the 20–75 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Lighting
200–650 lux- Threshold outside the 200–650 lux range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart office dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.