Thingsform IoT
IoT use case
Smart parking
Parking occupancy & turnover analytics
Occupancy
70%
598 %
Avg. stay
115min
15180 min
Entries/h
47
085
Sensor battery
29%
20100 %
40devices
38online
5sites
2 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 40 devices · 5 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Occupancy · Avg. stay · Entries/h · Sensor battery
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Occupancy
5–98 %- Threshold outside the 5–98 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Avg. stay
15–180 min- Threshold outside the 15–180 min range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Entries/h
0–85- Threshold outside the 0–85 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Sensor battery
20–100 %- Threshold outside the 20–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart parking dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.