Thingsform IoT
IoT use case
Smart greenhouse
Greenhouse climate & PAR control
Inside temp
27°C
1632 °C
Humidity
69%
4585 %
PAR
749lux
2001 200 lux
CO₂
431ppm
3501 100 ppm
20devices
19online
3sites
1 device offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 20 devices · 3 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Inside temp · Humidity · PAR · CO₂
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Inside temp
16–32 °C- Threshold outside the 16–32 °C range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Humidity
45–85 %- Threshold outside the 45–85 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
PAR
200–1 200 lux- Threshold outside the 200–1 200 lux range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
CO₂
350–1 100 ppm- Threshold outside the 350–1 100 ppm range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart greenhouse dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.