Thingsform IoT
IoT use case
Environment monitoring
Indoor & outdoor environment analysis
Temperature
24°C
1826 °C
Humidity
53%
3565 %
CO₂
839ppm
4001 200 ppm
Noise
39dB
3572 dB
18devices
17online
4sites
1 device offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 18 devices · 4 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Temperature · Humidity · CO₂ · Noise
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Temperature
18–26 °C- Threshold outside the 18–26 °C range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Humidity
35–65 %- Threshold outside the 35–65 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
CO₂
400–1 200 ppm- Threshold outside the 400–1 200 ppm range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Noise
35–72 dB- Threshold outside the 35–72 dB range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Environment monitoring dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.