Thingsform IoT
IoT use case
Swimming pool
Pool water quality & equipment control
pH
7.4
7.07.6
Chlorine
1.8ppm
0.82.5 ppm
Water temp
27°C
2430 °C
Pump
0.9kW
0.54.2 kW
6devices
6online
1sites
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 6 devices · 1 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- pH · Chlorine · Water temp · Pump
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
pH
7.0–7.6- Threshold outside the 7.0–7.6 range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Chlorine
0.8–2.5 ppm- Threshold outside the 0.8–2.5 ppm range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Water temp
24–30 °C- Threshold outside the 24–30 °C range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Pump
0.5–4.2 kW- Threshold outside the 0.5–4.2 kW range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Swimming pool dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.