Thingsform IoT
IoT use case
Smart irrigation
Soil moisture & irrigation control
Soil moisture
43%
1555 %
Valve
61%
0100 %
Water flow
15L/min
028 L/min
Rain
2.6mm
0.024.0 mm
22devices
21online
4sites
1 device offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 22 devices · 4 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Soil moisture · Valve · Water flow · Rain
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Soil moisture
15–55 %- Threshold outside the 15–55 % range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Valve
0–100 %- Threshold outside the 0–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Water flow
0–28 L/min- Threshold outside the 0–28 L/min range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Rain
0.0–24.0 mm- Threshold outside the 0.0–24.0 mm range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart irrigation dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.