Thingsform IoT
IoT use case
Smart lighting
Public & building lighting control
Ambient lux
572lux
50800 lux
Power
7.4kW
0.212.0 kW
Active faults
4
08
Dimming
38%
30100 %
52devices
49online
8sites
3 devices offline: supervision flags it rather than hiding it.
How it is wired
Sensors report to a gateway, which forwards to Thingsform over MQTT. What sets the platform apart is the lower line: the command goes back to the equipment.
- On site
- 52 devices · 8 sites
- Link
- MQTT · HTTP · Modbus
- Tracked readings
- Ambient lux · Power · Active faults · Dimming
What the platform does with these readings
The dashboard is only the visible part: each metric can carry a threshold, drift detection and a command in return.
Ambient lux
50–800 lux- Threshold outside the 50–800 lux range
- Slow drift, spotted before the threshold is crossed
- Command sent back to the device over MQTT or Modbus
Power
0.2–12.0 kW- Threshold outside the 0.2–12.0 kW range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Active faults
0–8- Threshold outside the 0–8 range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Dimming
30–100 %- Threshold outside the 30–100 % range
- Slow drift, spotted before the threshold is crossed
- Correlation with the site's other readings
Start with the Smart lighting dashboard
It ships configured. Connect your sensors over MQTT, HTTP or Modbus, and your values take the place of these.